Elinchrom BRX500 Head

Control, Power, Speed and Versatility

Code: EL/20441.1

£372.00£310.00
|
(%)

| Usually dispatched within 24 hours

Loading...

Elinchrom BRX500 Head

The new BRX compact flash units are a further evolution of the features and quality that are Elinchrom.

The concept is simple. Control, Power, Speed and Versatility. With many programmable features and the EL-Skyport remote system, the BRX enables photographers the greatest freedom to express their individuality.

The BRX series deliver the quality of performance needed for a modern workflow. Available in either 250 Ws or 500 Ws, they are perfect for portraiture, landscape, product and architectural photography.

They are the successors of the EL-500’s in this digital era.

What’s New?

Take full control of your units settings with the EL-Skyport App for iPhone™, iPad™ and iPod Touch™ via the optional WiFi module.
Additional features can be found when used with the EL-Skyport Software* such as Flash-Delay for strobing-effects.
Firmware update option.
Improved electronics for even better performance than before!

*The optional USB Transceiver RX and Skyport Software 3.0 are required.

Product Description

BRX Facts

Built-in EL-Skyport receiver for triggering.
EL-Skyport with 8 Frequency Channels with 4 Groups.
EL-Skyport Speed Sync mode for synchronization up to a 1/320 s on enabled SLR cameras.
Pre-flash detector system to enable the use of BRX with speedlights.
Visual Flash Confirmation option. The modelling lamp comes on to confirm the flash has been triggered.
Proportional, maximum, minimum and independent adjustment of the modelling lamp.
Variable f-stop steps: 1/1, 5/10, 4/10, 3/10, 2/10 or 1/10 steps are available.
Power range from 31-500Ws (5 f-stops)
Programmable ready beep function.
Power Auto-dump.
Automatic temperature controlled ventilation.
Action flashtube for sharper images.
Multi-voltage auto-detection: 90-270 V (excluding modelling lamp).
5V sync socket for maximum protection of digital cameras.
High impact resistant body shell.
Accessory bayonet allowing the complete range of light modifiers.
Rubberised handgrip with built-in fuse storage.

Nb The 16cm reflector in the picture is NOT included. The head is supplied with mains and Sync Leads, Protective cap and Modelling bulb only.